uApexisCam: 2-way Audio & AV Record

uApexisCam allows you to remotely monitor up to 9 multiple live video and audio feeds with top notch performance and super easy control for Apexis IP camera. Unlike the ordinary Apexis applications, uApexisCam not only gives the user many more options for operation, but enables to quickly and easily add new models right after user’s request through our open architecture software. * Main Features ▶ Up to 100 cameras can be configured ▶ Direct access to audio and video streams from cameras. No NVR or 3rd party server is required ▶ 2 Way Audio (Push to Talk): J011-WS, J011-WS-IRC, J011-WS-POE, J0111-WS, J0118-WS, J012-L-WS, J012-WS, J802-WS, J901-Z-WS, J902-Z-WS, J903-Z-WS ▶ Recordings can be scheduled to start and stop multiple times on any particular day, or the same time periods can be set for multiple days simultaneously ▶ Export event recordings in the specific time duration to one video clip ▶ Simply playback video from scheduled, event recordings by daily or hourly search ▶ Automatically record videos with audio by in-app noise and motion/face detection ▶ Enable or disable motion/face detection up to 9 cameras (max 4 recommended in dual core CPU) ▶ Easily view multiple feeds simultaneously on a screen with layout controls (1, 4, 8, 9 layouts) ▶ Last layout they were at automatically saved (initial layout is 4) ▶ Live video viewing of up to 9 feeds at a time or full screen ▶ Friendly navigate back and forth between multi cameras screen ▶ Auto sequence monitoring for automatic cameras switching ▶ Auto patrol to preset positions according to the preset number and time interval ▶ Pan and Tilt controls up to 8 directions ▶ Set and go presets up to 8 positions ▶ Control an automated vertical/horizontal patrol ▶ Switch IR-LED illumination for night vision on/off ▶ Adjust brightness and contrast ▶ Toggle mirror and flip mode on/off ▶ Adjust video resolution and light frequency ▶ Set the resolution of video image (if applicable) ▶ Enable or disable Aspect Fit ▶ Quickly and easily add new models with reload button ▶ Clone easily camera settings ▶ Reorder camera lists ▶ Exchange setup file between the Mac devices ▶ Enables setup without username and password for a public camera anywhere in the world ▶ Compatible with Dynamic DNS services ▶ Take snapshots or share via email, Facebook and/or Twitter * Supported IP Cameras - Common: Generic - H Series : H401-WS, H501-MPC-WS, H501-WS, H502-WS, H602-WS-IR, H604-WS-IR, H605-MPC-WS, H606-WS-IR, H701-IR, H701-MPC-IR, H702, H803-MPC-WS, H803-WS, H804-WS, H901-Z-WS - J Series : J011-POE, J011-WS, J011-WS-IRC, J0111-WS, J012-L-WS, J012-WS, J0118-WS, J0223-POE, J0223-WS-IR, J0223-WS-IRC, J403-WS, J601-WS-IR, J602-WS-IR, J602-WS-IRC, J603-Z-WS-IR, J802-WS, J803-MPC-WS, J803-WS, J803-Z-WS, J805-WS, J901-Z, J901-Z-WS, J902-Z-WS, J903-Z-WS, JP8015-WS * Note - Before you can control your camera(s) remotely over data networks, you need to setup your router to allow incoming traffic. For security reasons, routers don't normally allow external traffic into your local network. You should read your camera’s setup manual regarding port forwarding. For more information, please see www.portforward.com or www.dyndns.org - The quality of video display(s) shown on your device may vary according the quality of the camera(s) and the data received from them. - Simultaneously continuous capturing videos by maximum motion detection enabled may cause increased video frame and audio delays. If you have any questions or comments, or you would like to request that we support additional camera models, please send an email to support@ubntek.com